Page 58 - Kỷ yếu hội thảo quốc tế: Ứng dụng công nghệ mới trong công trình xanh - lần thứ 9 (ATiGB 2024)
P. 58
th
HỘI THẢO QUỐC TẾ ATiGB LẦN THỨ CHÍN - The 9 ATiGB 2024 49
[6]. S.Mengxiao, W.Qiang, and Z. Zhikai, "Comparison of the sulfate attack resistance of concrete by using supplementary
properties between high-volume fly ash concrete and high- cementitious materials (SCMs): A review", Construction and
volume steel slag concrete under temperature matching curing Building Materials, 2021, 281, pp. 122628.
condition", Construction and Building Materials, 2015, 98, pp.
649-655. [24].Hồ Văn Quân, "Ảnh hưởng của chất kết dính đến độ rỗng và
hệ số suy giảm khuếch tán clorua của HPC", Tạp chí Khoa học
[7]. K.De Weerdt, M.N.Haha, G.Le Saout, K.O.Kjellsen, Giao thông vận tải, 2020, Số 9 (12/2020), (Tập 71), pp. 1120-
H.Justnes, and B.Lothenbach, "Hydration mechanisms of 1129.
ternary Portland cements containing limestone powder and fly
ash", Cement and Concrete Research, 2011, 41, (3), pp. 279- [25] .V.Q. Ho, T.K. Nguyen, and C.T. Phan, "Combined effects of
291. ground granulated blast furnace slag and fly ash on the porosity
and chloride penetration of sand concrete", IEEE, 2021, pp. 39-
[8]. G.Kakali, S.Tsivilis, E.Aggeli, and M.Bati, "Hydration 44
products of C3A, C3S and Portland cement in the presence of
CaCO3", Cement and concrete Research, 2000, 30, (7), pp. [26].M.Cyr, P.Lawrence, and E.Ringot, "Efficiency of mineral
1073-1077. admixtures in mortars: Quantification of the physical and
chemical effects of fine admixtures in relation with
[9]. G.Menéndez, V.Bonavetti, and E.Irassar, "Strength compressive strength", Cement and concrete research, 2006,
development of ternary blended cement with limestone filler 36, (2), pp. 264-277.
and blast-furnace slag", Cement and Concrete Composites,
2003, 25, (1), pp. 61-67. [27].E.Irassar, "Sulfate attack on cementitious materials containing
[10].Association Française de Normalisation, "NF P18 500, Béton- limestone filler-A review", Cement and Concrete Research,
Bétons de sables", 1995. 2009, 39, (3), pp. 241-254
[11].Synthèse du Projet National de Recherche et Développement, [28] .B.Craeye, G.De Schutter, B.Desmet, J.Vantomme,
Sablocrete, "Bétons de sable, caractéristiques et pratiques G.Heirman, L.Vandewalle, Ö.Cizer, S.Aggoun, and E.Kadri,
d’utilisation" , Presses de l’école Nationale des Ponts et "Effect of mineral filler type on autogenous shrinkage of self-
Chaussées LCPC, 1994. compacting concrete", Cement and Concrete Research, 2010,
40, (6), pp. 908-913.
[12].Bộ Khoa học Công nghệ, "TCVN 3118: 2022- Bê tông -
Phương pháp xác định cường độ chịu nén", 2022. [29] .A.A.Elgalhud, R.K.Dhir, and G.Ghataora, "Limestone
[13].American Society for Testing and Materials, "ASTM C642- addition effects on concrete porosity", Cement and Concrete
Composites, 2016, 72, pp. 222-234.
Standard Test Method for Density, Absorption, and Voids in
Hardened Concrete", 1997. [30] .A.Arora, G.Sant, and N.Neithalath, "Ternary blends
containing slag and interground/blended limestone: Hydration,
[14].American Society for Testing and Materials, "ASTM C1202:
Standard Test Method for Electrical Indication of Concrete’s strength, and pore structure", Construction and Building
Ability to Resist Chloride Ion Penetration", 2012. Materials, 2016, 102, pp. 113-124.
[31] .R.K.Dhir, M.A.K.El-Mohr, and T.D.Dyer, "Chloride binding
[15].Nguyen Van Tuoi, Ho Van Quan., Pham Thai Uyet, "Study on in GGBS concrete", Cement and Concrete Research, 1996, 26,
characteristics of strength and water absorbance and
penetration of cement concrete using powdered limstone as (12), pp. 1767-1773.
cement partial replacement", Tạp Chí Giao thông vận tải,
2016, (Sustainability in Civil Engineering), pp. 5
[16].C.Alexandra, H.Bogdan, N.Camelia, and K.Zoltan, "Mix
design of self-compacting concrete with limestone filler versus
fly ash addition", Procedia Manufacturing, 2018, 22, pp. 301-
308.
[17].F.Shaker, A.Rashad, and M.Allam, "Properties of concrete
incorporating locally produced Portland limestone cement",
Ain Shams Engineering Journal, 2018, 9, (4), pp. 2301-2309.
[18].A.Gholampour, and T.Ozbakkaloglu, "Performance of
sustainable concretes containing very high volume Class-F fly
ash and ground granulated blast furnace slag", Journal of
Cleaner Production, 2017, 162, pp. 1407-1417.
[19] .T.S.Nguyen, T.K.Nguyen, and D.H.H.Pham, "Study on
Fabrication of Sand Concrete for Reinforced Concrete
Structures in Coastal construction in Vietnam", Springer, 2020,
pp. 999-1006.
[20].D. Wang, C.Shi, N.Farzadnia, Z.Shi, H.Jia, and Z.Ou, "A
review on use of limestone powder in cement-based materials:
Mechanism, hydration and microstructures", Construction and
Building Materials, 2018, 181, pp. 659-672.
[21].M. Nehdi, S.Mindess, and P.C.Aïtcin, "Optimization of high
strength limestone filler cement mortars", Cement and concrete
research, 1996, 26, (6), pp. 883-893.
[22].J.Li, Z.Wu, C.Shi, Q.Yuan, and Z.Zhang, "Durability of ultra-
high performance concrete – A review", Construction and
Building Materials, 2020, 255, pp. 119296.
[23]. M.M.A.Elahi, C.R.Shearer, A.Naser Rashid Reza, A.K.Saha,
M.N.N.Khan, M.M.Hossain, and P.K.Sarker, "Improving the
ISBN: 978-604-80-9779-0